Finishing Mill Module

Top Roll Dia (mm)
Stand F#1 Stand F#2 Stand F#3 Stand F#4 Stand F#5 Stand F#6 Stand F#7

Bottom Roll Dia (mm)
Stand F#1 Stand F#2 Stand F#3 Stand F#4 Stand F#5 Stand F#6 Stand F#7

Pass Schedule:

Pass No	Entry Thick (mm)	Exit Thick (mm)	Rolling Temp (C)	Speed (m/sec)	Waiting Time (s)	Pass Width (mm)


MICROSTRUCTURE EVOLUTION

Pass No	Temp(oC)	Strain	Strain Rate(/s)	Waiting Time (s)	Entry Grain Size(micron)	Total Strain	Critical Strain	DRX
10	11	12	13	14	15	16	17	18
20	21	22	23	24	25	26	27	28
30	31	32	33	34	35	36	37	38
40	41	42	43	44	45	46	47	48
50	51	52	53	54	55	56	57	58
60	61	62	63	64	65	66	67	68
70	71	72	73	74	75	76	77	78

Pass No	DRX	DRX Fraction	TNR_TEMP	TMR	TMR Fraction	TMR Grain Size, micron	Entry Grain Size(micron)	Austenite Grain Size(micron)
10	11	12	13	14	15	16	17	18
20	21	22	23	24	25	26	27	28
30	31	32	33	34	35	36	37	38
40	41	42	43	44	45	46	47	48
50	51	52	53	54	55	56	57	58
60	61	62	63	64	65	66	67	68
70	71	72	73	74	75	76	77	78

DEFORMATION CALCULATIONS

Pass No	Entry Thick(mm)	Exit Thick (mm)	Width (mm)	Speed (m/s)	Temp(C)	Draft (mm)	Reduction(%)	Strain Rate (/s)
10	11	12	13	14	15	16	17	18
20	21	22	23	24	25	26	27	28
30	31	32	33	34	35	36	37	38
40	41	42	43	44	45	46	47	48
50	51	52	53	54	55	56	57	58
60	61	62	63	64	65	66	67	68
70	71	72	73	74	75	76	77	78

00	01	02	03	04	05	06	07	08
10	11	12	13	14	15	16	17	18
20	21	22	23	24	25	26	27	28
30	31	32	33	34	35	36	37	38
40	41	42	43	44	45	46	47	48
50	51	52	53	54	55	56	57	58
60	61	62	63	64	65	66	67	68
70	71	72	73	74	75	76	77	78

Web hosting by Somee.com